How to Install the Appliance
The installation process is a little involved, but not too much. To keep it succinct, you need to:
|It’s recommended to setup the appliance with a working DHCP Server and access to the internet.|
The appliance has to be activated with a license that you will receive from Univention via email. This license has to be imported into the appliance via the web interface.
First off, you need to download the ownCloud X Appliance from the ownCloud download page and click "DOWNLOAD NOW". This will display a form, which you can see a sample of below, which you’ll need to fill out. It will ask you for the following details:
Download version (ESXi, VirtualBox, VMware, KVM)
Your first, last, and company names, and your country of origin
After you’ve filled out the form, click "DOWNLOAD OWNCLOUD" to begin the download of the virtual appliance.
The virtual appliance files are around 1.4GB in size, so may take some time, depending on your network bandwidth.
You can also download it from the owncloud.org page.
Once you’ve downloaded the virtual appliance file, import it into your virtualization software, accept the T’s & C’s of the license agreement, and launch it. The example below shows this being done using VirtualBox.
If you try to install an ownCloud appliance in your domain after removing an existing one, please remember to remove the original one from you DNS configuration.
Don’t Forget the IP Address and the Administrator Password. You will need them to use the Appliance.
Once imported, start the appliance. Doing so launches the installer wizard which helps you specify the core configuration. This includes:
Localization settings: Here, you can specify the language, timezone, and keyboard layout. Domain and network configuration: These settings can be either obtained automatically, via a DHCP lookup, or provided manually.
Domain setup: This lets you manage users and permissions directly within the ownCloud installation in the virtual appliance, or to make use of an existing Active Directory or UCS domain.
Account information: This lets you specify your organisation’s name, the email address (used for receiving the license which you’ll need to activate the appliance), and the administrator password. Note, this password is for the administrator (or root user) of the virtual machine, not for the ownCloud installation.
Host settings: This lets you specify the fully-qualified domain name of the virtual appliance, as well as an LDAP Base DN.
Once you’ve provided all of the required information, you can then finish the wizard, which will finish building the virtual appliance. Make sure that you double-check the information provided, so that you don’t have to start over.
When the wizard completes, the virtual machine will be almost ready to
use. You then need only retrieve the license file from the email which
was sent to you and upload it. The page to do that from can be found by
opening your browser to the IP address of the virtual appliance, as you
can see below. The installer may instruct you to use
access the activation page. If this gives an error in the browser, then
Once activated, you should be redirected to the portal, which you can see below.
If you want to create new users and groups, or download apps from the Univention appcenter click on the "System and domain settings". Login as the "Administrator" using the password that you supplied during the configuration wizard earlier.
If you are not redirected to the appliance login page, you can open it
using the following url:
https://<ip address of the virtual machine>/univention-management-console.
After you’ve done so, you will now be at the Univention management console, which you can see below.
The management console allows you to manage the virtual appliance (1), covering such areas as: users, devices, domains, and software. You will also be able to access the ownCloud web interface (2).
The default username for the ownCloud is:
owncloud and so is the
password. The password is not the password you supplied during the
For security reasons
rpcbind should be disabled in the appliance. An
open, from the internet accessable portmapper service like
be used by an attacker to perform DDoS-Reflection-Attacks. Furthermore,
the attacker can obtain information about your system, for example
running rpc-services, or existing network shares. The german IT security
agency "BSI" reported that systems with an open
rpcbind service were
used to perform DDoS-Reflection-Attacks against other systems.
If you want to create NFS shares on the appliance and give someone permission to access them, then you can enable